HITACHI

UH041 9 tonne EXCAVATOR

To have your sprockets redone the cost is around $400NZ

plus $NZ200 to send to AUCKLAND AND RETURN.

KJ Excavator provides track links for Korean and Japanese models.  These track links fit various sizes and capacity of track mounted vehicles.  They range in pitch from 135 mm to 215 mm.  They are available in both sealed and dry type.

http://www.kjexcavator.com/Track_Link.html

Hitachi UH041 sprockets and link assemblies

EBpart collected professional parts catalog from OEM suppliers, which gathered almost models part number and sizes, formed our special part number system and convenient for you to check your parts. Also we have some special machine model parts sizes, which will provide specialize production for your own machine.

1503,Yilu 3rd Building,488 Jiahe Rd,Xiamen ZIP:361009 Tel:86-592-5214556 / 5214558 Fax:86-592-5214559
WEB:http://www.ebpart.com
EMAIL: sales@ebpart.com

Track plates are 60.0cm x 16.5cm

Head Bolts are 106mm centres and the rear back bolts are 90mm spacings.

We are looking for tracklinks that will fit a Hitachi UH041

FARM MACHINERY, EXCAVATORS,BULLDOZERS ETC

Remember some things are cheaper to buy if you know where to look

Our right side sprockets need rebuilding. We use steel rods & low

hydrogen rods for welding to give that outer hardening. However we are also looking for good used

sprockets to fit and any other parts.

"After all these years when will the costs of things slow down in NZ "

More[ Hitachi UH041 ] [ UH041 Kawasaki swing hydraulic motor ] [ Hitachi UH041 rebuild sprockets ] [ Hitachi UH041 rebuild top roller ] [ Hitachi UH041 rebuild track links ] [ Excavator New Parts ] [ ISUZU ELF ] [ ISUZU ELF MOTOR ] [ ISUZU MASTER CYLINDER KIT ]

[ Check WHY THAILAND ] is better for Manufacturers & any Kiwi Company.